 |
|
| The
ceramic kiln to use at home The characteristics
of Hobbyceram kilns are:
- lower energy consumption
- shorter firing cycles
- uniform temperature distribution
- connection in any home plug
- easy loading.
All HC kilns are built according to the European
safety standards (EN 60335-1). They are delivered
ready to use with a full set of accessories. |
|
|
|
|
| SF
MODELS |
|
New models:
the lid is hinged to the kiln and opening turns off
the heating. SF tested.
Meets also VDE 0700-244. |
|
|
|
|
| Cod. |
Type |
C° |
lt |
Øint |
Hint |
Øext |
Hext |
Kg |
kW |
Accessories |
Euro
kiln only |
Euro
with HC 4 |
| 1232101
40 |
Hexagon
SF |
1260 |
24 |
30 |
34 |
45 |
60 |
40 |
2.3 |
si |
1.518,00 |
2.109,80 |
| 1232103
40 |
Hexagon
SFT |
1260 |
24 |
30 |
34 |
45 |
60 |
42 |
3.3 |
si |
1.865,00 |
2.478,30 |
| 1247101
40 |
Prisma
1 SF |
1260 |
50 |
42 |
34 |
58 |
62 |
52 |
3.3 |
si |
1.962,00 |
2.542,65 |
| 1247211
40 |
Prisma
2 SF |
1260 |
85 |
42 |
57 |
58 |
85 |
86 |
6.6 |
si |
2.766,00 |
3.378,10 |
| 1260201
40 |
Poliedro
2 SF |
1260 |
150 |
56 |
57 |
72 |
88 |
110 |
6.6 |
si |
3.508,00 |
4.086,50 |
| 1260301
40 |
Poliedro
3 SF |
1260 |
180 |
56 |
68 |
72 |
111 |
140 |
9.9 |
si |
4.344,00 |
4.943,40 |
|
|
|  |
|
| Cod. |
Article |
Note |
Euro |
| 128031 |
Triangolo/Stilt
03 |
12
pz/pcs |
18,15 |
| 128041 |
Triangolo/Stilt
04 |
6
pz/pcs |
18,15 |
| 128051 |
Triangolo/Stilt
05 |
6
pz/pcs |
20,35 |
| 128061 |
Triangolo/Stilt
06 |
6
pz/pcs |
20,35 |
| 128931 |
Colonnina/Shelf
support 3 cm |
3
pz/pcs |
4,95 |
| 128961 |
Colonnina/Shelf
support 6 cm |
3
pz/pcs |
7,70 |
| 128970 |
Colonnina/Shelf
support 10 cm |
3
pz/pcs |
12,10 |
| 128971 |
Colonnina/Shelf
support 14 cm |
3
pz/pcs |
19,80 |
| 12830 |
Piastra/Shelf
Hexagon Ø25 cm |
|
20,90 |
| 12831 |
Mezza
Piastra/Half shelf Hexagon |
|
13,20 |
| 12840 |
Piastra/Shelf
Prisma Ø38 cm |
|
31,35 |
| 12841 |
Mezza
Piastra/Half shelf Prisma |
|
19,80 |
| 12860 |
Piastra/Shelf
Poliedro Ø47 cm |
|
63,80 |
| 12865 |
Piastra/Shelf
Ercole Ø55 cm |
|
111,65 |
| 12854 |
Piastra
rettangolare/Rectangular shelf 50x40 cm |
|
59,95 |
| 12850 |
Piastra/Shelf/Marte
|
|
22,55 |
| 12848 |
Piastra
quadrata 38 cm in acciaio Steel shelf |
|
45,10 |
|
| |
|
| tEMPERED STEAL STILT |
| Max temperature 1050°C |
| Cod. |
Articolo |
Note |
Euro |
| 128031X |
Triangolo/Stilt
03 |
12
pz/pcs |
19,80 |
| 128041X |
Triangolo/Stilt
04 |
6
pz/pcs |
19,80 |
| 128051X |
Triangolo/Stilt
05 |
6
pz/pcs |
22,00 |
| 128061X |
Triangolo/Stilt
06 |
6
pz/pcs |
22,00 |
|
|
 |
 |
 |
 |
| HEXAGON 16 |
HEXAGON |
MARTE |
PRISMA1 |
|
|
| Cod. |
Type |
Volt* |
C° |
lt |
Øint |
Hint |
Øext |
Hext |
Kg |
kW |
Accessories |
Euro
kiln only |
Euro
with HC 4 |
| 12324
0040 |
Hexagon
16 |
230 |
1260 |
16 |
28 |
23 |
45 |
49 |
30 |
2.2 |
no |
966,00 |
1.493,25 |
| 12321
0040 |
Hexagon |
230 |
1260 |
24 |
28 |
34 |
45 |
60 |
35 |
2.2 |
si |
1.170,00 |
1.692,90 |
| 12381
0040 |
Marte |
230 |
1200 |
40 |
38 |
34 |
52 |
62 |
50 |
2.8 |
si |
1.274,00 |
1.800,70 |
| 12473
0040 |
Prisma
Special |
230 |
950 |
50 |
42 |
34 |
58 |
62 |
50 |
2.2 |
si |
1.499,00 |
1.994,30 |
| 12471
0040 |
Prisma
1 |
230 |
1260 |
55 |
44 |
34 |
58 |
62 |
48 |
3.0 |
si |
1.499,00 |
1.936,00 |
| 12473
1341 |
Prisma
1S.PT |
230 |
1260 |
50 |
42 |
34 |
58 |
62 |
50 |
3.3 |
si |
1.854,00 |
2.348,50 |
|
| * in England: 240 - 440 V |
| |
Prices Kilns without accessories
| Cod. |
Type |
Euro |
| 12324
0010 |
Hexagon
16 |
1.493,00 |
| 12321
0010 |
Hexagon |
1.640,00 |
| 12381
0010 |
Marte |
1.750,00 |
| 12473
0010 |
Prisma
Special |
1.944,00 |
| 12471
0010 |
Prisma
1 |
1.886,00 |
|
| |
Extracharge for HC8 thermocomputer
for glass and ceramics
Euro 187,00 Platinum thermocouple:
Euro 280,50 |
|
|
| |
|
NEW
with SIKURA controller
Kilns with more than one heating ring have the SIKURA
controller. This power supply box fully exploits the power of
the HC regulators, reducing wear and tear and protecting the
kiln from overfiring. |
| 
|
| POLIEDRO
2 |
|
 |
| POLIEDRO
3 |
|
|
|
| |
|
| Cod. |
Type |
Volt* |
C° |
lt |
Øint |
Hint |
Øext |
Hext |
Kg |
kW |
Accessories |
Euro
kiln only |
Euro
with HC 4 |
| 1247
21343 |
Prisma
2 S.PT |
400 |
1260 |
85 |
42 |
57 |
58 |
85 |
86 |
6.6 |
si |
3.088,00 |
3.674,00 |
| 1247
21342 |
Prisma
2 S.PT |
230 |
1260 |
85 |
42 |
57 |
58 |
85 |
86 |
6.6 |
si |
3.153,00 |
3.738,90 |
| 1247
20043 |
Prisma
2 |
400 |
1260 |
92 |
42 |
57 |
58 |
85 |
83 |
6.0 |
si |
2.625,00 |
3.217,50 |
| 1247
20042 |
Prisma
2 |
230 |
1260 |
92 |
44 |
57 |
58 |
85 |
83 |
6.0 |
si |
2.659,00 |
3.282,40 |
| 1260
20043 |
Poliedro
2 |
400 |
1260 |
150 |
56 |
57 |
72 |
88 |
110 |
6.6 |
si |
3.308,00 |
3.894,00 |
| 1260
20042 |
Poliedro
2 |
230 |
1260 |
150 |
56 |
57 |
72 |
88 |
110 |
6.0 |
si |
3.372,00 |
3.957,80 |
| 1260
30343 |
Poliedro
3 PT |
400 |
1260 |
210 |
56 |
80 |
72 |
111 |
140 |
9.9 |
si |
4.505,00 |
5.097,40 |
| 1260
30043 |
Poliedro
3 |
400 |
1260 |
210 |
56 |
80 |
72 |
111 |
140 |
9.9 |
si |
4.151,00 |
4.742,10 |
| 1260
50043 |
Poliedro 5 |
400 |
1050 |
360 |
56 |
138 |
72 |
176 |
230 |
12 |
no |
7.203,00 |
7.788,00 |
|
| * in England: 240 - 440 V |
| DIFFERENT POWER SUPPLIES
ON REQUEST |
|
|
| |
|
| Chamber
furnaces Nabertherm |
|
|
|
Serie
n 60 / l entry - n 100 entry
Easy to load, can be placed on a table (appropriate
base is
also available). Entry is available in two versions
: Entry / L
for temperatures up to 1150 °C and Entry N for temperatures
up to 1300 °C. |
|
| |
| Tipo/Type |
°C |
Int.
mm. |
Vol.
Ltr. |
Ext.
mm. |
kW |
Kg |
€ |
| l |
p |
h |
l |
p |
h |
| N
60/L Entry |
1150 |
350 |
400 |
460 |
60 |
590 |
680 |
675 |
3,6 |
82 |
2.212,00 |
| N
100/L Entry |
1150 |
400 |
450 |
575 |
100 |
640 |
730 |
790 |
7,0 |
100 |
3.192,00 |
|
N 60 Entry |
1300 |
350 |
400 |
460 |
60 |
590 |
680 |
675 |
5,5 |
82 |
2.443,00 |
|
N 100 Entry |
1300 |
400 |
450 |
575 |
100 |
640 |
730 |
790 |
9,0 |
100 |
3.450,00 |
|
| |
|
| |
Serie n 140 E
- n 280 e
Suitable for laboratories and schools these kilns are
ideal
for processing temperatures up to 1230 °C.
It is possible to choose a version that fires up to
1300°C
- Heating from 3 sides
- Heating coils embedded in grooves for protection
- Low electrical consumption
- Excellent temperature uniformity
- Base included |
 |
|
|
|
| Tipo/Type |
°C |
Int.
mm. |
Vol.
Ltr. |
Ext.
mm. |
kW |
Kg |
€ |
| l |
p |
h |
l |
p |
h |
| N140E |
1300 |
465 |
580 |
575 |
140 |
660 |
750 |
830 |
9 |
220 |
4.554,00 |
| N210E |
1300 |
500 |
580 |
690 |
210 |
710 |
750 |
960 |
12 |
270 |
5.625,00 |
|
N280E |
1300 |
550 |
580 |
830 |
280 |
760 |
750 |
1090 |
15 |
300 |
6.175,00 |
|
| |
|
| |
| |
controlling
system
Easy to operate, high control precision and safety, these are the basics
of all Nabertherm controllers.
All Nabertherm kilns are equipped with Program Controller S 3 / C 3
as standard.
If you want even more functions select controller S 7/C 7 or S 30/C
30. |
| |
|
| |
ceramotherm
n 54 e - n 300/h
Professional – Proven quality and new design
- Powder coating furnace housing, modern design, no sharp corners
- Optimum temperature uniformity
- Extra large handle for opening the door
- Air vent in the ceiling (good circulation)
- Self-supporting ceiling
- Double-walled, warp-free door guarantees cool outer surface without
fibre insulation.
The door is bricked and fitted by hand
- Easy to operate air regulating inlet valve
- Multilayer fibre-free insulation
- Base included
- Floor heating protected by SIC plates (except N 54E and N 80E)
- Heating from 5 sides (N 54E and N 80E from 2 sides)
- Temperature up to 1340°C
For processing temperatures between 900 – 1230°C we therefore
recommend models N 54 – N 300, and for regular high firing temperatures
between 1230°C - 1300°C our H models N 100 / H – N 300
/ H.
Extras for chamber furnaces:
- Stainless steel housing
- Observation hole
- Base with wheels or special height
- Safety clip to lock controller
- Door hinged on the left
- Separate control current supply
- Cooling air vent
- Stainless steel aspiration system |
|
| |
| Tipo/Type |
°C |
Int.
mm. |
Vol.
Ltr. |
Ext.
mm. |
kW |
Kg |
€ |
| l |
p |
h |
l |
p |
h |
| N54/L |
1200 |
350 |
410 |
350 |
54 |
600 |
795 |
1195 |
3,6 |
130 |
2.722,00 |
| N54/R |
1300 |
350 |
410 |
350 |
54 |
600 |
795 |
1195 |
5,5 |
130 |
3.820,00 |
|
N80/L |
1200 |
350 |
450 |
470 |
80 |
600 |
865 |
1340 |
5,5 |
170 |
3.514,00 |
| N80/R |
1300 |
350 |
450 |
470 |
80 |
600 |
865 |
1340 |
7,0 |
170 |
3.881,00 |
| N100 |
1300 |
400 |
530 |
460 |
100 |
660 |
1045 |
1430 |
9,0 |
270 |
5.456,00 |
| N150 |
1300 |
450 |
530 |
590 |
150 |
710 |
1045 |
1560 |
11,0 |
305 |
6.695,00 |
| N200 |
1300 |
500 |
530 |
720 |
200 |
760 |
1045 |
1690 |
15,0 |
345 |
7.475,00 |
| N300 |
1300 |
550 |
700 |
780 |
300 |
810 |
1215 |
1750 |
20,0 |
430 |
9.510,00 |
| N100/H |
1340 |
400 |
530 |
460 |
100 |
690 |
1060 |
1430 |
11,0 |
310 |
6.083,00 |
| N150/H |
1340 |
450 |
530 |
590 |
150 |
740 |
1060 |
1560 |
15,0 |
380 |
7.566,00 |
| N200/H |
1340 |
500 |
530 |
720 |
200 |
790 |
1060 |
1690 |
20,0 |
420 |
8.728,00 |
| N300/H |
1340 |
550 |
700 |
780 |
300 |
840 |
1230 |
1750 |
27,0 |
550 |
11.543,00 |
|
| |
|
| |
Top
Loaders, round
top 45 - top 190
Attractive design, lightweight and excellent firing results are only
a few features of our top loaders Top 45 to Top 190.
Castors are supplied as standard and increase mobility so that you
will always find the right place for the furnace.
Top quality:
- Heating elements, embedded in grooves for protection, heating from
all sides
- Heating elements in top quality, optimum wire size and length ensuring
a long service life
- Low-noise operation of the heating with Solid State Relais
- Precise temperature distribution thanks to fast the clocking of
switching operations
- High-quality Pt-RhPt thermocouple for exact temperature measurements
- Lid contact switch with force-release mechanism
- Multi-layered insulation for low power consumption and cool outer
surface
- Brick material in the furnace chamber guarantees clean firing results
- Attractive design with easy-care housing made of stainless steel
- Lid with adjustable quick-release lock, can be secured with padlock
- Wear-resistant lid sealing (brick surface on both ends)
- Spring-supported lid opening, very easy to open
- Infinitely adjustable inlet air opening in the furnace bottom for
improved ventilation and short cool-down times
- Air outlet on the side of the kiln with pipe connection, 80 mm diameter
- Castors for easy transport of the furnace without raising, lockable
- GS safety mark for controlled safety, CE
- Loading rail for Top 45 and Top 60 (optional)
- Raised base for Top 45 and Top 60 (optional) |
| |
 |
 |
 |
 |
 |
| Top 45 |
Top 60 |
Top 100 |
Top 140 |
Top 190 |
|
| |
| Tipo/Type |
°C |
Int.
mm. |
Vol.
Ltr. |
Ext.
mm. |
kW |
Tensione
d'alimentazione |
€ |
| Ø |
h |
l |
p |
h |
| Top
45 |
1300 |
410 |
340 |
45 |
580 |
750 |
670 |
3,6 |
monofase |
1.600 |
| Top
60 |
1200 |
410 |
460 |
60 |
580 |
750 |
800 |
3,6 |
monofase |
1.900 |
|
Top 60/R |
1300 |
410 |
460 |
60 |
580 |
750 |
800 |
5,5 |
trifase* |
2.300 |
| Top
100 |
1300 |
480 |
575 |
100 |
660 |
830 |
910 |
7,0 |
trifase |
2.900 |
| Top
140 |
1300 |
550 |
575 |
140 |
750 |
920 |
910 |
9,0 |
trifase |
3.000 |
| Top
190 |
1300 |
590 |
690 |
190 |
790 |
960 |
1020 |
12,0 |
trifase |
3.500 |
|
| *
solo 2 fasi allacciate |
|
| |
Glass Fusing kiln
Nabertherm GF 75 has been expressly studied to allow perfect glass fusions.
- The heat is delivered from the top with infrared tubes which keep
the wirings protected and,
together with the special fibre insulation, allow short heat-up
and cool-down times.
- Robust housing, made of special corrosion-free steel.
- Stainless steel stand with wheels included.
The controller C 30 (integrated controller) has been especially developed
for heat treating glass.
It enables nine customer-specific temperature programs, each with 18
segments
that may be saved.
Heating ramp can be programmed as can hold times and controlled cooling
ramps.
The large choice of Nabertherm kilns gives an answer to the requests
and needs of all artists, artisans or schools and small industries.
If you need kilns for special operations, Nabertherm will be able
to provide you with the perfect kiln. Laboratory kilns, dental
kilns, ovens for small and large fusions to fire at low temperatures
or as high as 1800 °C, glass kilns, grès, ceramics and metal
kilns with crucible and with protected doors, kilns to fire large
flat pieces or special tubes: these and much more can be
projected and built at the individual request of a client. Our long
experience will be used as a base for every special project.
Hobbyceram assistance and service together with Nabertherm
engineering department will be able to solve all your problems
and to answer all your technical questions. |
|
| |
| Tipo/Type |
°C |
Int.
mm. |
Vol.
Ltr. |
Ext.
mm. |
kW |
Kg |
€ |
| l |
p |
h |
l |
p |
h |
| GF
75 |
950 |
500 |
500 |
300 |
75 |
850 |
750 |
570 |
3,6 |
70 |
3.850,00 |
|
| |
|
